SmartPTT Release NotesVERSION 7.3.0SmartPTT version 7.3.0 includes changes in system functionality and design, as well as known bug fixes. New features in version 7.3.0 Monitoring Remote repeater administration in IP Site Connect and Capacity Plus systems (channel change, power level settings, turning off and on). Coverage map reproduction based on RSSI level of the received signals from GPS-enabled MOTOTRBO radios. Routers and UPS monitoring via SNMP. Hardware failures logging. Subscriber “black list” Automatic blocking of unauthorized radios in the MOTOTRBO network. Multigroups Dynamic routing of group calls between sites based on subscriber registration information. Radio Activity Radio Activity simulcast equipment support. Backup radioservers Redundant server support. In case of main server failure backup server takes over the network control. Multitouch Support for all types of multi-touch screens. GPS Settings of update interval for subscriber groups location on radioserver. Custom consoles Element activation options (one- or two-touch). Custom colours for buttons. Profiles Enabling/disabling of private calls monitoring for specific dispatchers. Automatic updates Automatic update of dispatch consoles upon connection to a radioserver with a higher version of the software installed. VERSION 7.1.0SmartPTT 7.1.0 implements new functionality, visual design enhancements and fixes of known issues. New Features Telephone Interconnect for Capacity Plus Rules in Radioserver Configurator Telephone Interconnect for Capacity Plus Starting with this version, there is a possibility for Capacity Plus network subscribers to make calls to PBX phones. E-mail Gateway Service of text messages delivery between radio subscribers and dispatch consoles is expanded with e-mail gateway function. E-mail Gateway allows users to duplicate messages sent within the radio network to the email addresses specified in the Radioserver Configurator. Backward delivery – from emails to a subscriber or to a subscriber group is also implemented in new version. Multi-touch New version includes Multi-touch function support for dispatcher consoles equipped with touchscreens. The use of these panels can improve the user interface and simplify the procedures of entering commands by dispatcher. Thus, for instance, making a call to a subscriber or a dispatcher, as well as establishing connection between PBX and radio network subscribers is now possible just by a single tapping with two fingers in the touchpad areas, corresponding to the objects of control. Lone Worker Functionality of supervisory control over subscribers in the Lone Worker mode is considerably expanded. Henceforth, the dispatcher console operator has the opportunity not only to register the Lone Worker rules violation, but also send him a text message or sound notifications upon the occurrence of the event. For the convenience of monitoring subscribers in Lone Worker mode, new pane - "Lone Workers" was added to SmartPTT Dispatcher software. This pane allows user to view Lone Workers, marked with color code corresponding to the degree of deviation the Subscriber's behavior from the specified criteria. Rules in Radioserver Configurator The opportunity to set rules (on a wide range of criteria) and perform actions (playback sounds, send a message) upon the occurrence of events specified by the rules was added in the SmartPTT Radioserver software. This functionality is available in a new tab of Radioserver Configurator – Rules. Previously this opportunity was available only for the dispatch console operators. Routes The new tool of SmartPTT Enterprise that significantly extends functionality of the dispatch system, especially for monitoring and controlling networks of highly mobile subscribers moving along the predefined route (for example, employees of transportation companies), is Route. Its meaning radically differs from the pre-existing concept of a Route as the trajectory of subscriber’s movement that, from now on, is called Track. The Route, starting with the version 7.1.0 is a polyline connecting key points of the network coverage area. Subscriber location near the key points is identified by the specified radius of the route and can be summarized in the Subscriber Locations report. VERSION 7.0.9SmartPTT 7.0.9 implements new functionality, visual design enhancements and fixes of known issues. New Features Direct IP Connection to Capacity Plus Dispatcher Console Enhancements Direct IP Connection to Capacity Plus SmartPTT Enterprise implements direct IP connection to Capacity Plus to receive voice and data streams. Control Station pool is needed to transmit outgoing commands and voice calls. Routing New features:
Subscribers Panel Subscribers Panel automatically generates list of large control buttons for radio subscribers. The panel provides convenient interface to perform voice calls and subscriber property modification. Telephone InterconnectNew features:
Dispatcher Console Enhancements
“Subscriber Locations” Report “Subscriber Locations” report is designed to show detailed report data about subscriber GPS locations. The report can be exported into formats: PDF\HTML\MHT\RTF\XLS\XLSX\CSV\TXT\Image\XPS. Operators New permission types are added for operators (see operator property window). Custom Consoles Custom Consoles are implemented as visual panels, designed at the dispatcher console to manage specific subscribers, groups or control stations. Embedded console designer allows to create panels containing visual buttons of variable size and placement assigned to corresponding subscribers or groups. Using visual control buttons the dispatcher can do voice calls, have quick access to subscriber properties or call window. Monitoring Monitoring functionality was added to Radioserver Configurator application. Monitoring allows to track all the events processed by the Radioserver (ARS, text messages, voice calls, telemetry, etc.). VERSION 7.0.8SmartPTT 7.0.8 implements new functionality, visual design enhancements and fixes of known issues. New Features Routing SmartPTT routing service for MotoTRBO IP Site Connect allows joining multiple IPSC systems into single radio network. The routing service is implemented in scope of SmartPTT Enterprise Radioserver and provides intelligent means of patching for voice and data streams between IP Site Connect systems. Advantages of SmartPTT Routing Service:
Note: Routing service is only available in SmartPTT Enterprise. Control Zone Panel Control Zone Panel is used to create, modify and display control zones over the map. Subscriber Location Panel Subscriber Location Panel shows the subscribers inside of selected area on the map. Points of Interest Points of Interest identify the locations of special interest, which are shown on the map and can be quickly found form the dispatcher console. Point of Interest consists of the point name, location coordinates and point picture. Sound Panel Selected group/subscriber sound volume boost control. Telephone Interconnect Added telephone interconnection for control stations working on analog channel. Map Added MapInfo support IP Site Connect Added “Authorization Key” support VERSION 7.0.7SmartPTT 7.0.7 implements new functionality, visual design enhancements and fixes of known issues. New Features Other Dispatcher Console Enhancements MotoTRBO IP Site Connect New server settings for MotoTRBO IP Site Connect:
Radio Activity Report Radio Activity Report shows amount of group calls done by subscribers for specified period of time, grouped hourly or daily. Call History Call History panel displays the list of recent subscriber voice calls. The panel is used for quick access to the call windows of the subscribers. Control Station Routing table at the Radioserver computer is automatically adjusted by SmartPTT Radioserver for used control stations. Note: “MOTOTRBO Configuration Utility” is not required anymore for route table settings. Map New Points of Interest. Points of Interest identify the locations of special interest, which are shown on the map and can be quickly found form the dispatcher console. Point of Interest consists of the point name, location coordinates and point picture. GPS New GPS monitoring options:
Telephone Interconnect Telephone call to radio group is implemented. To do the patch to New telephone interconnect options:
Event Log New columns in the event log:
Other Dispatcher Console Enhancements
Dispatcher call propagation In the configuration with several dispatchers working with the same base radio, dispatcher call made through the base radio is automatically propagated to other dispatcher consoles. VERSION 7.0.6SmartPTT 7.0.6 implements new functionality, visual design enhancements and fixes of known issues. New features Direct control over MotoTRBO IP Site Connect systems via IP connection (Enterprise edition) Direct control over MotoTRBO IP Site Connect systems via IP connection (Enterprise edition) SmartPTT Enterprise implements direct connection to digital repeaters working in MotoTRBO IP Site Connect mode. Each SmartPTT Enterprise Radioserver is able to control multiple MotoTRBO IP Site Connect systems. Notice! SmartPTT Enterprise doesn’t need mobile radios to be connected to Radioserver for dispatching control over MotoTRBO IP Site Connect. Also no computers should be located in radio coverage area. Radioserver can be located in any suitable place and must have direct IP connectivity to controlled MotoTRBO IP Site Connect systems. Report Wizard Report Wizard functionality allow flexible report creation based on the information stored in the event log. Using Report Wizard it is possible to select necessary fields for viewing, specify grouping and sorting fields, specify filtering criteria. Reports generated by Report Wizard are exported to Microsoft Excel. Sound Control Panel Sound control panel allows to: tune sound level for each connected base radio, mute base radio, Assign only one base radio to have sound turned on (Solo mode). Custom subscriber properties SmartPTT 7.0.6 allows dynamic creation of custom subscriber properties. Custom subscriber property can have several types: text, numeric, date, enumeration. This feature allows users to have business specific subscriber attributes, for example vehicle type, vehicle id, etc. Radio Check SmartPTT 7.0.6 implements radio check function for specified subscriber radio. Radio check is done by pressing corresponding button in subscriber property window. Permission Profiles SmartPTT 7.0.6 implements permission profiles defined at Radioserver. Profiles are used to limit access from dispatcher console to control stations, groups, services, MotoTRBO IP Site Connect slots. Operator options
GPS settings
VERSION 7.0.5SmartPTT 7.0.5 implements new functionality, visual design enhancements and fixes of known issues. Dispatcher Interface Enhancements Telephone Interconnect SmartPTT implements Telephone Interconnect service embedded into Radioserver module. Telephone Interconnect service allows connecting telephone and dispatcher subscribers. Connection is established by means of SIP and RTP protocols. Features:
Radioserver Event Log SmartPTT allows saving event log and recording voice calls at Radioserver side. SmartPTT Dispatcher Console implements viewing events and playback of voice records stored at Radioserver. Lone Worker SmartPTT allows working with radio subscribers in Lone Worker mode. When a subscriber is assigned to operate in Lone Worker mode, SmartPTT automatically tracks following criteria:
When some of criteria triggers, SmartPTT execute actions defined by settings of Lone Worker mode. Service SmartPTT implements service functionality to backup database and restore from backup copy (the functionality is only available for databases stored on the same PC as the Dispatcher Console). Map Enhancements SmartPTT implements MapPoint support. Dispatcher Interface Enhancements
VERSION 7.0.4SmartPTT 7.0.4 implements new functionality, visual design enhancements and fixes of known issues. New features: Telephone subscriber calls from dispatcher Common Dispatcher Console Enhancements Telephone subscriber calls from dispatcher SmartPTT has the functionality to do calls from dispatcher console to telephone subscribers via VoIP Gateways. The communication may be initiated either by dispatcher or telephone subscriber. Possibility of calls between radio and telephone subscribers will be implemented in version 7.0.5. Call window settings SmartPTT has number of settings for call window behavior:
Map
Event Log
Common Dispatcher Console Enhancements
Radioserver Enhancements
Rules and Alerts
Subscribers
VERSION 7.0.3SmartPTT 7.0.3 implements new functionality, visual design enhancements and fixes of known issues. New features: Dispatcher Intercom Functionality Dispatcher Intercom functionality provides full duplex voice communication between SmartPTT dispatcher consoles over IP.
Tree of Categories allows organizing all network objects (subscribers, dispatchers, base stations, groups) into logical, fully customizable tree.
GPS Rules allows launching specific actions on GPS related events. GPS-Event Types:
Possible actions assigned to GPS Rules:
Control Zone – region on a map imported from vector map file in polish format. Control Zones can be drawn by third-party applications having vector map drawing functionality (for example: GPSMapEdit). VERSION 7.0.2SmartPTT 7.0.2 implements new functionality, visual design enhancements and fixes of known issues. New features Movement track visualization and animation
Movement track visualization ad animation
“Rules and Alerts” function allows setting of rules to filter all kind of event which may happen in the system. One may set a filter specifying the conditions for event log fields:
For each specified rule one my set following actions:
VERSION 7.0.1
|  |
|
|
|
|
|